National Taiwan Ocean University Institutional Repository:Item 987654321/52781
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 28611/40652
造访人次 : 772528      在线人数 : 46
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻


题名: Performance Effects of Heat Transfer and Geometry on Heat Pipes Thermal Modules under Forced Convection
作者: Rong-TsuWang
Jung-Chang Wang
贡献者: 國立臺灣海洋大學:輪機工程學系
关键词: Heat pipe
Heat sink
Thermal module
Thermal resistance
Least square method
日期: 2014-10
上传时间: 2020-01-06T08:05:04Z
出版者: Scisence Journals
摘要: Abstract: The geometry and heat transfer effects on heat pipes embedded heat sinks-cooling system are investigated in the present paper. In the forced convection system, two different heat pipe geometrical shapes of L and U configurations are taken into account. This study adopts a versatile superposition method and least-square estimators with thermal resistance network analysis to design and experiment their geometry and heat transfer effects under different fan speeds and heat source areas. The results suggest that the characteristics of system performance under varying speeds and areas are significantly different from those under altering speeds and areas. When the thermal performances of these two configurations are 0.04 °C/W of U-shaped heat pipes at 78.85 W, and L-shaped heat pipes are lowest 1.04 °C/W at 34 W, respectively, the lowest thermal resistances of the representative L- and U-shaped heat pipe–heat sink thermal modules are respectively 0.25 °C/W and 0.17 °C/W under twin fans of 3000 RPM and 30 × 30 mm2 heat sources. The result of this work is a useful thermal management method to facilitate rapid analysis and has provided a useful insight into the design of heat pipe cooling systems.
關聯: 57(1) pp 140-149
显示于类别:[輪機工程學系] 期刊論文


档案 描述 大小格式浏览次数



著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈