National Taiwan Ocean University Institutional Repository:Item 987654321/50284
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 27242/39085
造访人次 : 2414576      在线人数 : 80
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/50284

题名: Surface Modification of Plastic Thin Film Using Anodic Aluminum Oxide Template for Nano Imprint
作者: Chih Wei Wu
Jeou Long Lee
Yi Lin
Yung Kang Shen
贡献者: 國立臺灣海洋大學:機械與機電工程學系
关键词: Anodic Aluminum Oxide (AAO)
Contact Angle (CA)
Surface Modification
日期: 2010-06
上传时间: 2018-09-28T06:25:09Z
出版者: Key Engineering Materials
摘要: Abstract: Nano-porous anodic alumina oxide (AAO) templates are fabricated by anodizing method. The average diameter of nano-porous anodic alumina is 200 nm. The molded plastic thin film (Polycarbonate, PC) with nano-structure is fabricated by AAO as mold insert for nanoimprint. This research discusses the surface property of molded plastic thin film for different processing parameters (embossing temperature, embossing pressure, embossing time, de-molding temperature) on nanoimprint. The original contact angle of PC material without nano-structrue is about 78.2°. The contact angle of molded PC with nano-structrue is about 115.5°. The contact angle of molded plastic film (PC) with nano-structure is larger than that without nano-structure. The hydrophilic property of PC material has changed to hydrophobic property. A significant advantage of the fabrication process employed in this work is that it can create the good surface modification of plastic thin film.
關聯: 443 pp.711-716
URI: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/50284
显示于类别:[機械與機電工程學系] 期刊論文

文件中的档案:

档案 描述 大小格式浏览次数
index.html0KbHTML6检视/开启


在NTOUR中所有的数据项都受到原著作权保护.

 


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈