National Taiwan Ocean University Institutional Repository:Item 987654321/43550
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 27314/39158
造访人次 : 2472049      在线人数 : 82
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/43550

题名: Machine Vision-Based Methods for Measuring the Cross-Sectional Geometric Accuracy of Microdrills and Their Comparisons
作者: Wen-Tung Chang;Yu-Yun Lu
贡献者: 國立臺灣海洋大學:機械與機電工程學系
日期: 2016-01
上传时间: 2017-09-21T03:14:51Z
出版者: Nova Science Publishers
摘要: Abstract:Microdrills are precision cutting tools widely used in drilling microholes and microvias in printed circuit boards (PCBs). The measurement of the cross-sectional geometric accuracy of microdrills is an important inspection task to ensure quality control of microdrill products. The cross-sectional geometric parameters of a microdrill essentially include both the cross-sectional web thickness and the cross-sectional outer diameter. For a microdrill to be measured, its drill body is ground off to yield a ground cross-sectional plane. Digital images of the ground cross-sectional plane are then captured and dealt with by image processing procedures and mathematical approaches for measuring the cross-sectional geometric parameters. To this end, several machine vision-based methods are introduced in this chapter. For the cross-sectional web thickness measurement, two methods, called the best-fit circle (BFC) method and the extreme common-tangent-circle (ECTC) method, are presented and demonstrated. For the cross-sectional outer diameter measurement, two methods, called the fitted dividing line (FDL) method and the exterior contour segmenting (ECS) method, are presented and demonstrated. The presented methods were tested and compared through experiments to measure the cross-sectional geometry of certain microdrill samples. It showed that the machine vision-based methods introduced in this chapter could have sufficient precision and accuracy for measuring the cross-sectional geometric accuracy of certain microdrills.
URI: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/43550
显示于类别:[機械與機電工程學系] 演講及研討會

文件中的档案:

没有与此文件相关的档案.



在NTOUR中所有的数据项都受到原著作权保护.

 


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈