English  |  正體中文  |  简体中文  |  Items with full text/Total items : 27308/39152
Visitors : 2447276      Online Users : 49
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Adv. Search
LoginUploadHelpAboutAdminister

Please use this identifier to cite or link to this item: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/42138

Title: A Three-Dimensional Atomic-Scale Finite Element Model for a Copper Nano Thin Film Subject to a Uniaxial Tension
Authors: Jinn Tong Chiu;Yeou Yih Lin;Ship Peng Lo
Contributors: 國立臺灣海洋大學:系統工程暨造船學系
Keywords: Morse’s Potential Function;Nano-Scale Uniaxial Tension;Three-Dimensional Atomic-Scale Finite Element Model
Date: 2012
Issue Date: 2017-04-27T01:29:38Z
Abstract: Abstract:A three-dimensional atomic-scale finite element model was developed in this paper for simulation of a nano-scale uniaxial tension. First, the Morse’s potential function was used to simulate the forces acting among particles. Furthermore, a non-linear spring and dashpot element with a lumped mass was used to establish an atomic model. The elongation of the spring at fracture was used to simulate the radius of fracture of the atomic link. This method was applied to investigate the proportional tension test of an idealized FCC single crystal copper film along the x direction. The study includes the stress-strain curve, the effect of five categories of atomic distances on the stress-strain curve; and the effect of strain-rate on the stress-strain curve. The results showed that (1)the simulated maximum stress for copper is very close to 30.0GPa, which is also the value of maximum equivalent stress obtained by Lin and Hwang [6], verifying the validity of the calculation of this paper. In the tension test of copper, necking develops gradually and eventually leads to fracture. The simulated deformed material element during each stage of deformation was similar to that simulated by Komanduri et al.[2](2)the influence of =6.2608 on the five categories of atomic distance considered was limited and it may be neglected to save computation time,(3)when the strain-rate was large, the resistance to deformation was also large, leading to an increase in the yield stress and fracture stress.
URI: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/42138
Appears in Collections:[系統工程暨造船學系] 期刊論文

Files in This Item:

File Description SizeFormat
index.html0KbHTML49View/Open


All items in NTOUR are protected by copyright, with all rights reserved.

 


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback