National Taiwan Ocean University Institutional Repository:Item 987654321/32919
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 27533/39387
造訪人次 : 2540342      線上人數 : 34
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 進階搜尋

請使用永久網址來引用或連結此文件: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/32919

題名: Fabrication and Characterization of Integratedn pressure sensor
作者: Chung Cheng Chang
貢獻者: NTOU:Department of Electrical Engineering
國立臺灣海洋大學:電機工程學系
關鍵詞: Polydimethylsiloxane (PDMS);Polyethylene terephthalate (PET);Polymeric diaphragm pressure sensor;Strain gauge
日期: 2001
上傳時間: 2012-06-18T07:48:35Z
出版者: Electron Devices and Materials Symposia Tainan
摘要: We demonstrated a simple fabrication of polymeric diaphragm pressure sensors by embedding a commercial thin-film strain gauge in a polymeric diaphragm. Two different polymer materials, polydimethylsiloxane (PDMS) and polyethylene terephthalate (PET), were employed for fabrication. Performance of pressure sensors fabricated with two different polymers including sensitivity, linearity, and long-term stability was thoroughly compared using a characterization setup operating in either compressed air or water. Pressure sensitivities were similar for air and water environments regardless of the polymer material. However, the sensitivity and resolution of PET pressure sensors were about 2.5 times better than those of PDMS pressure sensors. Moreover, significant degradation of PDMS pressure sensors was observed over time while PET pressure sensors exhibited good stability in water. Overall, PET is better suited for making liquid pressure sensors than PDMS.
URI: http://ntour.ntou.edu.tw/handle/987654321/32919
顯示於類別:[電機工程學系] 演講及研討會

文件中的檔案:

檔案 描述 大小格式瀏覽次數
index.html0KbHTML134檢視/開啟


在NTOUR中所有的資料項目都受到原著作權保護.

 


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋