National Taiwan Ocean University Institutional Repository:Item 987654321/32549
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 28611/40652
造访人次 : 781054      在线人数 : 58
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/32549

题名: Analysis for Diving Regulator of Manufacturing Process
作者: Jung Chang Wang;Yu Pin Tsai
贡献者: 國立臺灣海洋大學:輪機工程學系
关键词: Diving Regulator;Injection Mold;Insert Molding Process;SCUBA;Vapor Chamber
日期: 2011-02
上传时间: 2012-06-18T06:00:14Z
出版者: Advanced Materials Research
摘要: Abstract:Diving regulator converts the compressed air in a tank into atmosphere air for divers and plays a very important role of SCUBA diving apparatus. The article analyzes its manufacturing process of injection mold in order to enhance the strength after insert molding through the good thermal performance of vapor chamber. The insert molding process is that the metal insert is firstly put into the cavity and then composed an embedded metal-plastic product by injection molding. These results proved that the product strength can be improved significantly with a yield rate up to 100% through this manufacturing process.
關聯: 213, pp.68-72
URI: http://ntour.ntou.edu.tw/handle/987654321/32549
显示于类别:[輪機工程學系] 期刊論文

文件中的档案:

没有与此文件相关的档案.



在NTOUR中所有的数据项都受到原著作权保护.

 


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈