National Taiwan Ocean University Institutional Repository:Item 987654321/32549
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 28611/40652
Visitors : 769727      Online Users : 64
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Adv. Search

Please use this identifier to cite or link to this item:

Title: Analysis for Diving Regulator of Manufacturing Process
Authors: Jung Chang Wang;Yu Pin Tsai
Contributors: 國立臺灣海洋大學:輪機工程學系
Keywords: Diving Regulator;Injection Mold;Insert Molding Process;SCUBA;Vapor Chamber
Date: 2011-02
Issue Date: 2012-06-18T06:00:14Z
Publisher: Advanced Materials Research
Abstract: Abstract:Diving regulator converts the compressed air in a tank into atmosphere air for divers and plays a very important role of SCUBA diving apparatus. The article analyzes its manufacturing process of injection mold in order to enhance the strength after insert molding through the good thermal performance of vapor chamber. The insert molding process is that the metal insert is firstly put into the cavity and then composed an embedded metal-plastic product by injection molding. These results proved that the product strength can be improved significantly with a yield rate up to 100% through this manufacturing process.
Relation: 213, pp.68-72
Appears in Collections:[Department of Marine Engineering] Periodical Articles

Files in This Item:

There are no files associated with this item.

All items in NTOUR are protected by copyright, with all rights reserved.


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback