English  |  正體中文  |  简体中文  |  Items with full text/Total items : 26988/38789
Visitors : 2350447      Online Users : 32
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Adv. Search
LoginUploadHelpAboutAdminister

Please use this identifier to cite or link to this item: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/24054

Title: Dynamic Modeling and Analysis of a High Speed Precision Drilling Machine
Authors: Yih-Hwang Lin;M. W. Trethewey;H. M. Reed;J. D. Shawley;S. J. Sager
Contributors: NTOU:Department of Mechanical and Mechatronic Engineering
國立臺灣海洋大學:機械與機電工程學系
Date: 1990
Issue Date: 2011-10-20T08:09:49Z
Publisher: ASME Journal of Vibration and Acoustics
Abstract: abstract:This paper describes the modeling and dynamic analysis of a high speed precision circuit board drilling machine. The drilling machine has two banks of movable drill spindles supported between parallel granite beams on an air bearing suspension. Each drill spindle is programmed to move laterally between the beams under the position control of a servo-feedback system. The drill spindles must complete a nominal 3.048 mm (0.12 in.) lateral move and a vertical drilling sequence every 200 ms. while maintaining an absolute positioning accuracy within 0.01778 mm (0.0007 in.). In order to meet these demanding specifications the dynamic behavior of the complete drill spindle/air bearing/granite beam system must be well understood. A specialized finite element model (FEM) is used to examine the dynamic responses of the critical components of this machine. The FEM code is capable of analyzing a sprung two degrees of freedom system moving on an elastic beam in an arbitrary fashion. The discussion concentrates on the engineering modeling considerations and compromises which were necessary to analyze the drilling machine with this computer code. The modeling rationale and use of experimental data to form an effective computer model capable of analyzing the dynamic behavior of the drilling machine are emphasized. Typical results from the finite element model are presented to illustrate the obtainable level of accuracy, detail and the limitations for modeling a system of this nature.
Relation: 112(3), pp.355-365
URI: http://ntour.ntou.edu.tw/handle/987654321/24054
Appears in Collections:[機械與機電工程學系] 期刊論文

Files in This Item:

There are no files associated with this item.



All items in NTOUR are protected by copyright, with all rights reserved.

 


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback