National Taiwan Ocean University Institutional Repository:Item 987654321/23718
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 27287/39131
造访人次 : 2442778      在线人数 : 30
RC Version 4.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ntour.ntou.edu.tw:8080/ir/handle/987654321/23718

题名: Microstructure and Notch Properties of Heat-Treated Ti-4.5Al-3V-2Mo-2Fe Laser Welds
作者: Wei-Chih Chung;Leu-Wen Tsay;Chun Chen
贡献者: NTOU:Institute of Materials Engineering
國立臺灣海洋大學:材料工程研究所
关键词: Ti-4.5Al-3V-2Mo-2Fe;microstructure;notch properties;heat treatment;laser welding;impact toughness;notched tensile strength
日期: 2009
上传时间: 2011-10-20T08:07:28Z
出版者: Materials Transactions(The Japan Institute of Metals)
摘要: Abstract: The microstructure and transformation behavior of Ti-4.5Al-3V-2Mo-2Fe alloy and its laser welds after various heat treatments were investigated. Notch properties, such as impact toughness and notched tensile strength, were also measured on the welds to choose an appropriate post-weld heat treatment (PWHT) of the alloy. The temperature regimes in which β transformed into α', α'' or retained as β after quenching were identified and discussed. The results indicated that α'' could be obtained primarily by rapid quenching from 880∼840°C solution temperatures and was identified as a base-centered orthorhombic (centered on the C face) with the lattice parameters of a=0.305 nm, b=0.489 nm, and c=0.457 nm. The as-welded specimen exhibited fine acicular α in the β matrix with hardness considerably higher than the mill-annealed base metal. For a PWHT temperature lower than 800°C, the change in microstructure and hardness of the welds depended mainly on the temperature, not on the cooling rate. If the PWHT temperature was higher than 800°C, both the temperature and the cooling rate were important in altering microstructure and hardness of the welds. The welds after a 704°C/4 h treatment could prevent notch brittleness, reduce hardness variation in different regions of the weld, and obtain notch properties similar to the mill-annealed base metal.
關聯: 50(03), pp.544-550
URI: http://ntour.ntou.edu.tw/handle/987654321/23718
显示于类别:[材料工程研究所] 期刊論文

文件中的档案:

档案 描述 大小格式浏览次数
index.html0KbHTML262检视/开启


在NTOUR中所有的数据项都受到原著作权保护.

 


著作權政策宣告: 本網站之內容為國立臺灣海洋大學所收錄之機構典藏,無償提供學術研究與公眾教育等公益性使用,請合理使用本網站之內容,以尊重著作權人之權益。
網站維護: 海大圖資處 圖書系統組
DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈